Wiggle Wire® Stainless Steel Greenhouse Poly Film & Shade Cloth Attachment System with Aluminum U-Channel Base Kits

Imitation is the sincerest form of flattery but don’t be fooled by inexpensive, imported spring wire. Look for our trademark Wiggle Wire® brand for the quality that has proven to be a low-cost, effective way to attach polyethylene or shade material to greenhouses. Just install the aluminum base and you can attach multiple layers of polyethylene and/or shade cloth to your structure. Proudly made in the USA. This kit includes 6' Wiggle Wire bundles and 6'-6” bundles of Aluminum U-Channel Base sections with self-drilling center groove guides.

• The original Wiggle Wire® greenhouse poly and shade cloth fastening system. Made in the USA.

• Tightly secures polyethylene or shade cloth to greenhouses or other structures.

• Easily bends to mount to most greenhouse frames and bows. Self-tapping screws (not included) make installation a snap to metal framed structures. Pre-drilling for wood screws when applied to lumber structure is recommended.

•  Wiggle Wire® compresses and elongates when installed within the Aluminum U-Channel Base, giving you the proper length for installation with minimal waste. Fastening screws not included.

• Wiggle Wire®: 0.0915” thick. Made from stainless steel spring wire and 10% larger in diameter than competitors.

• One Wiggle Wire® in the channel can securely hold up to (2) 6-mil polyethylene film layers (perfect for inflated greenhouse roofs) and still have room for (2) more 6-mil polyethylene film layers for an inflated greenhouse end wall.
  
  
  

 Call 1800-852-3443 to order custom lengths. Wiggle Wire and base also available for purchase separately.