 |
The PT-30 is an innovative greenhouse. It can be used as a seasonal cold frame but is also heavy-duty enough to be used as an inexpensive, year-round growing structure. Order it frame-only or as a complete package with heavy-duty trusses, end frames, doors and poly covering. The complete package assembles quickly with minimal tools and eliminates the time and materials needed to build your own end frames and doors.
- Heavy duty
2" x 14 gage bows in three sections for easy shipping and assembly.
- Modular design
Add sections as you need them to expand with your operation.
- Frame only or complete package
Add your own poly and ends or get it all from us.
|
|
|
 |
20% Larger Tubing!
We manufacture the
PT-30 arches with an industry leading 2" x 14 gauge tubing so that you can rest assured it will provide years of trouble-free use.
|
- Photos
- Options and accessories
- Pricing
- Specifications
- Support
|
Optional galvanized end frame kit speeds setup and eliminates
the need for any lumber. Ready for poly. Included in complete packages.
No door opening – $195
6' door opening – $229
3' door opening – $295
Door not included. See below for optional door pricing.
|
|
Ready to install in above end frame packages (matching door opening required).
Includes 8mm twin wall polycarbonate covering on door frame. Included in complete packages.
6' x 6'-8" double swinging door package – $315 ea.
6' x 6'-8" double sliding door – $575 ea.
3' x 6'-8" single swinging door – $160 ea.
|
|
Bolt-on to the intermediate frame sections of a frame-only PT-30 for increased strength.
Included in complete packages.
$29 ea.
|
|
Year-round growing with LB White and Reznor heaters. Choose from 30,000–400,000 BTU heaters in either natural gas or propane. Long-lasting and fuel efficient, these heater will extend your season for increased profit.
Starting at $688
|
 |
Various percentages of knitted shade cloth are available from 30% and up.
Includes edge taping, hems and grommets every 3 feet. |
| Part # |
Description |
Price per sq. ft. |
| SH1004 |
30% black |
$0.18 |
| SH1008 |
30% aluminet |
$0.37 |
| SH1007 |
40% black |
$0.20 |
| SH1003 |
50% black |
$0.21 |
| SH1000 |
60% black |
$0.22 |
| SH1199 |
60% green |
$0.31 |
| SH1195 |
30% aluminet |
$0.40 |
|
 |
Our pre-assembled roof inflation kit creates an insulating dead air space between a double layer poly roof for greater energy efficiency and visual appeal. Gives you that nice tight, even poly look. Includes blower, heavy-duty mounting bracket, flex tube and air-transfer gaskets. |
| Part # |
Description |
Price |
| PT2415 |
Pre-assembled inflation kit |
$97.00 |
| |
| Replacement parts |
| PT2444 |
Inflation blower #4C440 |
$59.00 |
| PT2407 |
Heavy-duty inflation blower mount |
$12.44 |
| PT2437 |
3" x 5' flex tubing |
$15.00 |
| PT2420 |
4-1/2" hose clamp |
$4.53 |
| PT2436 |
Air transfer gasket |
$0.79 |
|
 |
Poly Patch is the leading film repair tape in America. A complete first-aid kit for greenhouses,
this easy-to-use patching tape bonds aggressively to polyethylene film. |
| Part # |
Description |
Price |
| PT2440 |
4" x 10' Poly-Patch tape |
$4.00 |
| PT2441 |
4" x 48' Poly-Patch tape |
$18.00 |
|
Frame only price includes: three-piece bows, diagonal wind braces, ground stakes, assembly hardware,
(3) purlin runs and set up manual. (End frame verticals are not included.)
|
Size (Width x Length) |
4-foot spacing |
6-foot spacing |
30' x 24' |
|
|
30' x 48' |
|
|
30' x 72' |
|
|
30' x 96' |
|
|
30' x 144' |
|
|
|
Complete package price includes: three-piece bows, diagonal wind braces, ground stakes, assembly hardware, (3) purlin runs and set up manual, Three-part truss on every intermediate frame section, Roll-form end frame (packages), roll-form side rails, Wiggle Wire™ poly fastening system, single layer clear poly roof and ends, double swinging end doors (one end).
|
Size (Width x Length) |
4-foot spacing |
6-foot spacing |
30' x 24' |
|
|
30' x 48' |
|
|
30' x 72' |
|
|
30' x 96' |
|
|
| 30' x 144' |
$8,367.17 |
$6,697.49 |
| |
Additional lengths available. Please call for quote. FOB Castle Rock, MN. |
|
|
|
|
|
Starting at 16' or 18' with increments of 4' or 6'
|
|
clear or white 6 mil. UVI treated polyethylene
|
|
(2) runs of 1.163" x 17 ga. and (1) run of 1.315" x 17 ga.
(peak) galvanized steel
|
|
clear or white 6 mil. UVI treated polyethylene
|
|
|
|
2" O.D. 14-gauge galvanized steel tubing
|
 |
| You can download the setup manual below along with other helpful files. You will need the free Adobe Acrobat Reader to view these files. |
| PT 30 (4.3mb) |
If you need additional technical support or have a question not answered here, we can be reached 8 AM to 4:30 PM central time, Monday through Friday at: Phone: 800-852-3443 (toll-free US and Canada) or 651-463-7009
FAX: 651-463-2479
E-mail: support@poly-tex.com |
|
|
