|
|
Strong, durable and long-lasting, Wadsworth Integrated Vent Systems provide you with a precise greenhouse environment whether you have a retail or growing operation. Efficiently control the air temperature for more profitable plant growing and/or a more comfortable shopping experience for your customers.
Wadsworth Vent Systems can be controlled from a thermostat or a state-of-the-art computer system like the STEP Series controls. |
| |
|
|
|
- 1/20 horsepower - T.E.N.V.
- 115 volt / 60Hz. / .68 amp
- Ball bearing motor
- Copper windings – insulation call B
- Thermal overload protection – automatic reset
- Quick reversing
- 1600 R.P.M.
- Continuous duty
- Lifts up to 75' of 48" polycarbonate roof ridge vent
| |
- 1/5 horsepower - T.E.N.V.
- 115 volt / 60Hz. / 2.5 amp
- Ball bearing motor
- Thermal overload protection – automatic reset
- Quick reversing
- 1600 R.P.M.
- Continuous duty
- Lifts up to 325' of 54" polycarbonate roof ridge vent
|
|
|
|
|
|
Determine the size of your drive shaft. Measure the outside diameter of the shaft.
|
|
|
|
|
|
- Opens in increments: 1/4, 1/2, and full open
- This is a master control. If placed in the center it can have up to six 2R Slave Units (three on each side).
- Primarily used with STEP50, STEP500, M-1608 or thermostats.
- It can be used with a computer control, like the EnviroSTEP and it will open in proportions. The computer overrides the incremental control command.
- Growers who are upgrading to a computer control can use existing incremental vent controls, but if ordering a new vent automation system, order the LST control with computers.
- External limit switches.
|
|
 |
| VC-100A/I 1-3/8" shaft |
M-1080 |
$826 |
| VC-100A/I 1-5/8" shaft |
M-1085 |
$826 |
| VC-2000A/I 1-3/8" shaft |
M-1180 |
$1,025 |
| VC-2000A/I 1-5/8" shaft |
M-1185 |
$1,025 |
|
|
|
|
- Opens proportionally with a computerized control.
- This is a master control. If placed in the center it can have up to six 2R Slave Units (three on each side).
- Primarily used with EnviroSTEP, VersiSTEP and microSTEP/SA computer controls. It can be used with any computer control for proportional vent movement.
- It is used with the MiniSTEP to move vents from full open to full closed.
- If used with STEP 50, STEP 500, 4-stage control or thermostat it does not open in increments, only full open to full closed.
- External limit switches.
|
|
 |
| VC-100A LST 1-3/8" shaft |
M-1040 |
$746 |
| VC-100A LST 1-5/8" shaft |
M-1045 |
$746 |
| VC-2000A LST 1-3/8" shaft |
M-1140 |
$947 |
| VC-2000A LST 1-5/8" shaft |
M-1145 |
$947 |
|
|
|
|
- Used with a master control—movement follows the master unit.
- Used with Incremental control it opens in increments: closed, 1/4, 1/2, and full open.
- Used with LST control it opens proportionally, following the master unit.
- If the master control is placed in the center it can have six 2R slave units (three on each side).
- External limit switches.
|
|
| VC-100A 2R 1-3/8" shaft |
M-1030 |
$717 |
| VC-100A 2R 1-5/8" shaft |
M-1035 |
$717 |
| VC-2000A 2R 1-3/8" shaft |
M-1130 |
$917 |
| VC-2000A 2R 1-5/8" shaft |
M-1135 |
$917 |
|
|
|
| |
|
- Opens proportionally with a computerized control.
- This is a master control. If placed in the center it can have up to six 2R Slave Units (three on each side).
- Primarily used with EnviroSTEP, VersiSTEP and microSTEP/SA computer controls. It can be used with any computer control for proportional vent movement.
- It is used with the MiniSTEP to move vents from full open to full closed.
- If used with STEP 50, STEP 500, 4-stage control or thermostat it does not open in increments, only full open to full closed.
|
|
 |
| VC-100A ILS/LST 1-3/8" shaft |
M-1042 |
$824 |
| VC-100A ILS/LST 1-5/8" shaft |
M-1047 |
$824 |
| VC-2000A ILS/LST 1-3/8" shaft |
M-1142 |
$1,061 |
| VC-2000A ILS/LST 1-5/8" shaft |
M-1147 |
$1,061 |
|
|
|
| |
|
- Used with an ILS/LST master control. Movement follow the master unit and opens proportionally.
- If the master control is placed in the center, it can have up to six 2R Slave Units (three on each side).
- Internal limit switches.
|
|
 |
| VC-100A ILS/LST/2R 1-3/8" shaft |
M-1032 |
$805 |
| VC-100A ILS/LST/2R 1-5/8" shaft |
M-1037 |
$805 |
| VC-2000A ILS/LST/2R 1-3/8" shaft |
M-1132 |
$1,041 |
| VC-2000A ILS/LST/2R 1-5/8" shaft |
M-1137 |
$1,041 |
|
|
|
|
|
PowerRack is built to operate your vents reliably, so you can concentrate on growing. Virtually maintenance free, PowerRack is solid and reliable. Available in straight or curved configurations.
- Zinc pinion gear with shoulders to bear the weight.
- Easy alignment: Rack works even when the vent is not perfectly square. Unique design prevents binding.
- Resist corrosion with stainless clevis pins, cotter pins, set screws, cast sash brackets and tough nylon bearings.
- Precision teeth assure smooth movement.
- Arm and housing manufactured from corrosion resistant, high-strength aluminum alloy.
- Wide load-bearing surfaces
- Replaceable parts
|
| |
| |
|
28" |
1-3/8" |
M-2828 |
$17.30 |
28" |
1-5/8" |
M-2928 |
$17.30 |
36" |
1-3/8" |
M-2836 |
$18.20 |
36" |
1-5/8" |
M-2936 |
$18.20 |
42" |
1-3/8" |
M-2842 |
$18.90 |
42" |
1-5/8" |
M-2942 |
$18.90 |
48" |
1-3/8" |
M-2848 |
$19.80 |
48" |
1-5/8" |
M-2948 |
$19.80 |
53" |
1-3/8" |
M-2853 |
$20.55 |
53" |
1-5/8" |
M-2953 |
$20.55 |
66" |
1-3/8" |
M-2866 |
$22.30 |
66" |
1-5/8" |
M-2966 |
$22.30 |
72" |
1-3/8" |
M-2872 |
$23.40 |
72" |
1-5/8" |
M-2972 |
$23.40 |
|
|
|
|
|
| |
18" |
1-3/8" |
M-2618 |
$15.30 |
18" |
1-5/8" |
M-2718 |
$15.30 |
28" |
1-3/8" |
M-2628 |
$16.80 |
28" |
1-5/8" |
M-2728 |
$16.80 |
36" |
1-3/8" |
M-2636 |
$17.50 |
36" |
1-5/8" |
M-2736 |
$17.50 |
42" |
1-3/8" |
M-2642 |
$18.20 |
42" |
1-5/8" |
M-2742 |
$18.20 |
48" |
1-3/8" |
M-2648 |
$19.10 |
48" |
1-5/8" |
M-2748 |
$19.10 |
53" |
1-3/8" |
M-2653 |
$19.80 |
53" |
1-5/8" |
M-2753 |
$19.80 |
66" |
1-3/8" |
M-2666 |
$21.50 |
66" |
1-5/8" |
M-2766 |
$21.50 |
72" |
1-3/8" |
M-2672 |
$22.50 |
72" |
1-5/8" |
M-2772 |
$22.50 |
|
| |
|
| |
| Universal Shaft Hanger 1-3/8" shaft |
S-2806 |
$3.60 |
| Universal Shaft Hanger 1-5/8" shaft |
S-2808 |
$5.60 |
| U-Bolt 3/8" x 1-1/2" x 2-1/2" (1" pipe) |
H-2489 |
$1.50 |
| U-Bolt 3/8" x 1-3/4" x 2-3/4" (1-1/4" pipe) |
H-2491 |
$1.30 |
| U-Bolt 3/8" x 2" x 2-5/8" (1-1/2" pipe) |
H-2492 |
$1.50 |
| U-Bolt 3/8" x 2-1/2" x 3-1/8 " (2" pipe) |
H-2494 |
$1.75 |
| U-Bolt 3/8" x 1-9/16" x 2-1/2" (1-1/2" sq. tube) |
H-2520 |
$0.92 |
| U-Bolt 3/8" x 2-1/8" x 3 " (2" sq. tube) |
H-2525 |
$0.80 |
| U-Bolt 3/8" x 2-5/8 " x 3-1/2" (2-1/2" sq. tube) |
H-2530 |
$1.50 |
| U-Bolt 3/8" x 3-1/8 " x 4 " (3" sq. tube) |
H-2537 |
$1.60 |
|
|
|
|
| |
| All Wadsworth prices FOB Avarda, CO. PowerRack is a trademark of Wadsworth Control Systems, Inc. |
|
| |
|
|
